Enter your zip to
find local pros.
Please enter a valid 5 digit zip code

How to Get Smooth Wall Texture With a Skim Coat

This DIY smooth wall texture guide gives you a step-by-step instructions on how to smooth textured walls with a skim coat.

Are you doing a home improvement project?

Modernize can pair you with three to four pros in your area, so you can compare options and save time and money.

Before moving to Texas and building a house, I didn’t realize the wide variety of texture finishes that are possible on drywall. Where I grew up in Utah, walls were always smooth, and the heavy texture that seems to be the norm in Texas and many other southern states feels unfinished to me. So, I’ve decided to tackle the texture myself by smoothing it out with a skim coat before I paint or wallpaper each room.

Here’s a sneak-peek at the process before we dive into the details:

Smoothing Your Wall Texture

I started the process in this small bathroom, where I was planning to add some fun jackalope wallpaper but couldn’t wallpaper over the thick texture. After lots of research I determined that a simple skim coat would do the trick to smooth the wall texture enough to add the paper. Adding the skim coat to smooth the wall texture was super inexpensive and a very simple process.

You can hire a painter to smooth textured walls, but the cost for labor would have put the project out of my budget. The cost of supplies and doing it myself put the total investment around $50 and 5 hours. Not bad for the huge impact.

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-1

Here is the bathroom before. I was told that the walls get this orange peel texture treatment to hide imperfections in the sheetrock seams, but I’ve lived in a lot of places with sheetrock and flat walls, so I’m not sure what is really going on. What I do know is that I don’t love it.

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-3

The process of smoothing textured walls with skim coating is fairly common. It refers to spreading a layer of joint compound over the walls to fill in the bumps and valleys in the texture, effectively creating a smooth surface. The texture itself is made of a spray-on joint compound, and since my walls were painted with a flat paint, I had no prep work before I got started. I looked at a few tutorials before attempting on my own, and as I began I actually developed a little different method that really worked quickly and easily.

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-4

Step by Step Instructions for Skim Coating to Smooth Wall Texture

Tools Needed

To smooth your textured walls with a skim coat, you will need:

  • All-Purpose Joint Compound (Sold at Home Depot — bucket is the best.)
  • 10–12-inch Taping Knife
  • 14-inch Mud Pan
  • Smaller putty knives for details

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-6

Step 1 to Smooth Wall Texture

Scoop some of the pre-mixed compound into the mud pan. It has the texture of creamy peanut butter. The process of layering it onto the wall is also a little like smoothing peanut butter onto a piece of bread and going all different directions until it stays perfectly smooth.

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-7

Step 2 to Smooth Wall Texture

Once you have the mud in the pan, use the longer taping knife to scoop a couple inches of compound up, then with the mud facing the wall, simply spread in a smooth motion down the wall.

Find the Right Contractor for Your Project

Whether you’re ready to begin your project now or need some expert advice, our network of contractors are here to help. With a few simple questions, we’ll find the best local professionals for you

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-13

You’ll find that the long taping knife makes creating a smooth surface pretty simple. Scraping right on top of the existing texture, pulling the compound down the wall will start to fill the holes in the texture and create a smooth surface.

Step 3 to Smooth Wall Texture

Work in about a two-foot area by pulling the compound down and down, then back and forth in smooth motions until it begins to set a little bit. As it dries, the compound becomes harder to scrape, so the final swipes with the taping knife can create a fairly smooth surface without a bunch of seam lines.  You can see the difference between the skim-coated surface on the bottom of this shot and the textured wall below. What a difference!

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-11Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-9

The compound can have bubbles in it, and you may notice some air bubbles forming as you spread the mud on the walls. Don’t worry, you’ll easily be able to smooth those out further as the coating dries, and even add more mud if you need to.

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-5Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-10

As you finish spreading in one area, scoop another inch or so of mud and move onto the next area. With the large knife and some efficient scraping, you’ll be able to make great time. I was able to start and finish the bathroom skim coat in about four hours.

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-12

Step 4 to Smooth Wall Texture

To skim coat around the tile and fixtures, I taped it all off as I would have had I been painting. The joint compound is super easy to clean-up once it’s dry because it’s basically dried powder. I used the ladder to reach the tops of the walls. I decided against skim coating the ceiling (I’m planning to add some wood planks eventually).

Once the skim coat has dried, examine it for major rough areas or fallen globs of mud. These can all be carefully smoothed with some sandpaper. Once the walls are smoothed and sanded, you’re ready to paint or add wallpaper!

Jackalope-Wallpaper-over-Textured-Walls-One-Little-Minute-Blog-35

Step 5: Finished Results

Skim Coat on Textured Walls - Miranda Anderson for Modernize.com-14

I love the finished look of my smooth wall texture and wallpapered walls. Good luck with your own wall-smoothing project!

Find the Right Contractor for Your Project

Whether you’re ready to begin your project now or need some expert advice, our network of contractors are here to help. With a few simple questions, we’ll find the best local professionals for you

Reviews from Real Homeowners

About Us

Welcome to Homeowner Resources! We are the Modernize blog. Modernize pairs more than 3 million homeowners a year with pre-vetted contractors in their area. This blog started because we believe homeowners should know everything about their homes, from how their HVAC works to which front door colors they might love. On Homeowner Resources, you can find information on every part of your home, right down to how you can negotiate with contractors to get the best price. Here's more about the blog.

Need a contractor? Learn more about how Modernize finds the right pro for you.