No Local Pros Yet
...but we're always adding new contractors and can let you know when one's ready to connect.
Get Matched by Modernize
-
Share details about your home project
-
Quickly connect with top-rated local pros.
-
Compare quotes and choose the best fit.
What Local Generator Contractors Do
Generator contractors in Kentucky handle installation, maintenance, and repair for both standby and portable generator systems. Common services include:
- Whole-home standby generator installation (natural gas or propane)
- Portable generator setup and transfer switch installation
- Automatic transfer switch (ATS) installation
- Manual transfer switch installation
- Generator repair and troubleshooting
- Annual maintenance and load testing
- Fuel system connections (gas line and propane tank)
- Permit acquisition and utility coordination
- Generator replacement and upgrade
Standby vs. Portable: Which Is Right for You?
Standby generators are permanently installed outside the home, connected to your gas or propane supply, and start automatically within seconds of an outage — no action required. They can power the entire home or selected circuits. Portable generators require manual setup, run on gasoline, and are significantly less expensive upfront but more limited in capacity and convenience. For anything beyond occasional, short outages, most homeowners opt for a standby system.
| Type | Typical Installed Cost | Best For |
|---|---|---|
| Portable generator (7–12kW) | $800 – $2,000 (unit only) | Short outages, occasional use, tight budgets |
| Standby generator (10–16kW) — partial home | $4,000 – $8,000 installed | Essential circuits: HVAC, fridge, lights, medical |
| Standby generator (18–22kW) — whole home | $8,000 – $15,000 installed | Full home coverage, frequent or extended outages |
| Large standby (24–48kW) | $12,000 – $25,000+ installed | Large homes, high electrical load |
For a more detailed cost breakdown, see Modernize’s generator installation cost guide.
Transfer Switches: What You Need to Know
Any standby or hardwired generator requires a transfer switch — the device that safely disconnects your home from the utility grid before generator power comes on. Without one, backfed power can injure or kill utility workers restoring lines. Most local codes require a transfer switch for any permanent generator installation. A licensed contractor will include this in the installation scope and pull the required permits.
Why Hire a Licensed Generator Contractor in Owensboro
Generator installation involves electrical work, gas line connections, and local permit requirements — all of which need a licensed contractor in Kentucky. An improperly installed generator is a fire, carbon monoxide, and electrocution risk. A licensed pro will size the system correctly for your home’s load, meet local setback and code requirements, and carry the liability insurance that protects your home. Always verify license and insurance before work begins.
Don’t wait for the next outage — get free quotes from generator pros in Owensboro.
Get Free Generator Quotes
