Cost of Replacing Windows in Florida
The average cost of replacing windows in Florida in 2025 is $1,064 per window installed. Typical prices fall between $1,038 on the low end and $1,105 on the high end, depending on the city. Material costs make up the bulk of pricing (averaging $907), while labor adds about $157. Costs are higher in metro areas like Miami and Fort Lauderdale due to demand, permitting, and stricter coastal building codes.
2026 Overall Window Costs in Florida by City
| City | Adjusted Total Cost | Material Cost | Labor Cost |
|---|---|---|---|
| Miami | $1,105 | $947 | $158 |
| Fort Lauderdale | $1,096 | $939 | $156 |
| Orlando | $1,076 | $922 | $153 |
| Daytona Beach | $1,057 | $906 | $151 |
| St. Petersburg | $1,048 | $898 | $149 |
| Tampa | $1,048 | $898 | $149 |
| West Palm Beach | $1,096 | $939 | $156 |
| Jacksonville | $1,038 | $889 | $148 |
The proprietary costs shown in the above table reflect overall window installation averages across Florida. Real-world estimates for impact windows, a common window type in Florida, are typically higher because they account for specialized hurricane glass, reinforced framing, and stricter building codes in coastal zones. Actual impact window pricing often runs above that baseline depending on size, material, energy efficiency, and High Velocity Hurricane Zone (HVHZ) requirements. See below for impact window costs across the state.
2026 Florida Impact Window Costs by City
Overall, expect to pay $1,200 to $2,500 per window installed in Florida, with coastal areas skewing higher due to stricter codes and coastal weather demands.
| City | Impact Window Cost (Installed) |
|---|---|
| Miami | $1,800 to $2,500 |
| Fort Lauderdale | $1,700 to $2,400 |
| Orlando | $1,400 to $2,100 |
| Daytona Beach | $1,400 to $2,000 |
| St. Petersburg | $1,300 to $1,900 |
| Tampa | $1,300 to $1,900 |
| West Palm Beach | $1,700 to $2,400 |
| Jacksonville | $1,200 to $1,800 |
Miami
Impact windows in Miami typically cost $1,800 to $2,500 per window installed. HVHZ codes, reinforced framing, and professional installation requirements drive up expenses compared to all-window averages of $1,105.
Fort Lauderdale
Homeowners should expect to pay $1,700 to $2,400 per impact window installed. Like Miami, coastal storm regulations significantly impact pricing beyond the average $1,096 cost for standard windows.
Orlando
In Orlando, impact window prices run approximately $1,400 to $2,100 per installation. While less costly than coastal cities, specialized glass and energy features still elevate prices above the all-window average of $1,076.
Jacksonville
Jacksonville offers some of the most competitive impact window pricing, at $1,200 to $1,800 per window installed. Reduced regulatory burden and lower labor costs help keep this price lower than other Florida metros.
What Affects Impact Window Costs in Florida?
- Window Material and Glass Type: Premium frames like wood or fiberglass, plus upgrades such as laminated or low-E coatings, increase overall cost.
- Installation Complexity: Custom sizes, multi-story homes, or difficult-to-reach openings require more labor and may raise costs.
- City and Region: Coastal cities like Miami and Fort Lauderdale have stricter building codes, which adds to permitting and labor expenses.
- Storm Protection Standards: Florida’s hurricane-prone areas often require higher impact ratings, increasing both material and installation costs.
- Number of Windows Installed: Bulk projects often qualify for volume discounts, reducing per-window pricing.
Climate Considerations by Region in Florida
- South Florida (Miami, Fort Lauderdale, West Palm Beach): Being in High Velocity Hurricane Zones (HVHZ), these areas require impact-rated windows capable of withstanding high winds and debris, which pushes both material and labor costs upward.
- Central Florida (Orlando, Daytona Beach, Tampa, St. Petersburg): While not subject to the same HVHZ standards, Central Florida still experiences strong storms and heat. As a result, homeowners balance storm protection with energy efficiency (often choosing double‑pane Low‑E or laminated glass), resulting in moderate impact window costs.
- North Florida (Jacksonville and beyond): Though less prone to severe hurricanes, North Florida still benefits from impact windows for peace of mind and energy savings. Lower permitting complexity and reduced code requirements make this region one of the more affordable markets for installation.
What “Impact-Rated” Really Means in Florida
In Florida, “impact-rated” applies to the entire window system — frame, laminated glass, and hardware — not just the glass itself. It means the unit has been tested for wind pressure and debris impact, and those performance levels can vary by product and configuration.
Because of that, two quotes can differ substantially in price even when both specify “impact.” To compare bids fairly, ask the contractor to identify the exact product configuration in writing and to use clear “impact-rated” language rather than vague terms like “hurricane-grade.”
The Proof to Look For: DP Ratings, Product Approvals, and Labels
A strong quote should include the window’s DP (Design Pressure) rating or provide the manufacturer spec sheet for the quoted configuration. If you’re in a stricter jurisdiction, such as HVHZ (High Velocity Hurricane Zone) areas like Miami-Dade or Broward, contractors may also need to provide verifiable product approval documentation tied to the specific product being installed.
After installation, the product should be identifiable through labeling, markings and documentation that matches your quote. If the contractor can’t explain which paperwork supports the product for required permits and inspections, it may be difficult to compare the quote accurately.
Buyer Checklist: Comparing Impact Window Quotes in Florida
Make sure your quote includes the following:
- “Impact-Rated” Is Explicit: The quote states “impact-rated,” not just “hurricane or storm” language.
- Exact Configuration Listed: Brand, product line, frame material, and glass package (e.g., laminated, Low-E).
- DP Rating Included: DP is listed on the quote or an attached spec sheet.
- Approvals Referenced When Required: Florida Product Approval / Miami-Dade Notice of Acceptance (jurisdiction-dependent).
- Permit Responsibility: Clearly states who pulls the permit and supports inspection.
- Installation Scope Defined: Replacement vs. new window opening and anchoring/buck (frame inside the opening) scope are specific, not vague.
- Warranty Breakdown: Manufacturer product warranty vs. contractor labor warranty, listed separately.
- Change-Order Terms: Clear language for wood rot/stucco/structural repairs and pricing.
Two impact window quotes can differ because the performance level and documentation can differ. The safest comparison is to confirm the DP rating, request the approval paperwork when required, and make sure the quoted configuration is clearly identified in writing.
Popular Window Types in Florida
Here are some popular options for replacement windows in Florida:
- Double‑Pane: A cost-effective choice for energy efficiency; widely used across Florida for improving insulation and comfort.
- Low‑E and Tinted Glass: Help reduce heat and UV damage, especially effective in sunny regions like Florida.
- Vinyl Frames: Durable, low‑maintenance, and energy efficient — popular in coastal and humid climates.
- Single‑Hung, Double‑Hung, Casement, Awning, Picture Windows: Common architectural styles offering ventilation, views, and aesthetic flexibility.
Best Window Brands in Florida
If you’re replacing a window in Florida, some of the top brands serving the region include:
- Andersen Windows
- Direct Remodels
- Pella
- Marvin
See our full guide to the best impact windows for detailed brand comparisons.
FAQs About Impact Windows in Florida
What’s the best window type in Florida?
Impact-resistant double-pane or laminated windows are the best choice for hurricane protection and energy efficiency.
When is the best time to get new windows in Florida?
Late fall or winter is ideal for replacing a window in Florida, as contractor demand slows and weather conditions are milder, which can reduce installation costs.
Do impact windows increase home value in Florida?
Yes. Buyers in coastal regions often prioritize homes with hurricane protection, making impact windows a strong resale feature.
How much do hurricane windows cost in Florida compared to standard windows?
While standard windows may cost $400 to $800, impact windows in Florida average $1,064 installed because of specialized glass and framing requirements.
Are there rebates or incentives for impact windows in Florida?
Some utility companies and insurance providers offer rebates or premium discounts for installing energy-efficient or hurricane-rated windows.
Next Steps
On average, replacing a window in Florida, regardless of type, costs around $1,064. For impact-rated windows, which are essential for coastal protection and energy savings, expect pricing to range between $1,200 and $2,500 per window depending on features and location. Modernize connects homeowners with vetted, local window installers across Florida. Through our contractor network, we help match you with pros for cost quotes, installations, and guidance — making your window replacement smoother and more efficient.
Compare top-rated windows pros in your area.
Read real homeowner reviews, explore qualifications, and view promotions. Modernize makes it easy to browse professionals and find one that will be perfect for your project.
-
Window Replacement Cost in Colorado
Average Cost for Window Replacement in Colorado On average as of , Colorado window replacement projects typically cost $500 to $1,350 per window installed. Pricing varies based on window style,... -
2026 Ohio Window Cost Guide
Cost of Replacing Windows in Ohio The statewide average for a standard vinyl replacement window in falls between $600 and $1,150 installed. City labor rates and glass upgrades move the... -
Window Replacement Cost in Virginia
Average Cost for Window Replacement in Virginia On average as of , for Virginia window replacement projects, you can expect to pay $450 to $1,200 per window. The cost per... -
Window Glass Replacement Cost in Maryland 2026
How Much Does Window Replacement Cost in Maryland? On average, you’ll pay $825 for window replacement in Maryland. Compared to the national average of $650 to $1,000 per window, Maryland... -
How Much Does Window Replacement Cost in Nebraska?
Average Cost for Window Replacement in Nebraska As of 2026, Nebraska homeowners can expect to pay $425 to $1,050 per window installed, depending on window style, material quality, and local... -
Window Replacement Cost in Washington State
How Much Does It Cost to Replace Windows in Washington State? Most homeowners in Washington spend between $600 and $1,200 per window for replacement, including materials and labor. Costs vary...